Serving the Lexington area  ·  (859) 785-4928  ·  Open Mon-Sun 7am-7pm
📞 (859) 785-4928 Free Quote

Metal Roofing in Frankfort, KY (40601) · Local Professionals

Lexington Metal Roofing · Fast response in Frankfort and the Lexington area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+241Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Frankfort's hillside homes and river-valley bungalows take a beating from heavy rain and ice, and that shows up on roofs all over town. From the historic blocks near the Old State Capitol to the shaded streets off Louisville Road, the housing stock is old, steep, and full of character, which means roofing here is never a one-size-fits-all job.

Homeowners in the 40601 ZIP code call Lexington Metal Roofing because we understand how water moves on these lots, how ice dams form at the eaves, and why so many of these roofs need leak repair and new gutters rather than a full tear-off. We are based in Lexington and serve Frankfort and the surrounding areas, and we bring the same crew and the same standards to every job.

Metal Roofing in Frankfort (40601)

Frankfort sits in a river valley with hills rising on both sides, and that terrain shapes every roofing job we do here. The older homes near downtown often have steep pitches, narrow side yards, and mature trees that drop limbs and leaves onto the roof, while the hillside properties on the south and west sides deal with runoff that can overwhelm gutters and erode soil at the foundation. We see a lot of failed fasteners, separated seams, and flashing gaps on older metal roofs, plus ice damming at the eaves when freeze-thaw cycles hit. The karst limestone under much of the area also means drainage matters, because water that pools near a foundation can find its way into a sinkhole or a basement. On top of that, historic district design review can restrict panel profiles and colors, so we check those rules before we order materials.

Our team has worked on everything from standing seam and corrugated panels to metal shingles and stone-coated steel, and we have handled commercial and agricultural buildings on the farms outside town. We know the difference between a repair that will hold and one that will not, and we tell you which one you are looking at.

Our services in Frankfort

How a Job Works in Frankfort

Step 1: you call us at (859) 785-4928 or request a free estimate, and we schedule an on-site assessment. We look at the roof, the flashing, the gutters, and the access, and we give you a written scope with pricing before any work starts.

Step 2: we pull the permit if one is required, coordinate with any HOA or historic review, and schedule the work. On tight lots near downtown or on steep hillside drives, we plan material staging carefully so we do not block neighbors or damage landscaping. We protect the property, remove the old roofing, and install the new system to the manufacturer's specs.

Step 3: we clean up every day and do a final walkthrough with you. We haul away all debris, check the gutters and downspouts, and make sure you know what was done and what to watch for. We leave your property clean and your roof watertight.

Pricing in Frankfort depends on the size of the roof, the pitch, the access, the condition of the decking, and how urgent the work is. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Repairs start at $450, leak repair at $450, screw replacement and re-fastening at $750, and gutters for metal roofs at $9 per linear foot. Flashing and chimney or skylight repair starts at $600, and snow guards and ice protection start at $1,200. We give you a free estimate so you know the real number before you commit. Call (859) 785-4928 to schedule.

My house is on a hillside in Frankfort and water runs hard off the roof. What is the best metal roofing setup for that?
On hillside homes, we usually recommend standing seam with a continuous gutter system sized for the runoff, plus proper downspout placement to move water away from the foundation. We also check the fascia and soffit because fast runoff can expose weak spots. We look at the grade and the drainage path before we recommend a panel.
A storm just lifted some panels on my roof in Frankfort. How fast can you respond?
We treat wind-lifted panels and active leaks as priorities. Call (859) 785-4928 and we will schedule an inspection as soon as possible, often the same day or next day depending on the weather. We can tarp or secure the roof to prevent further damage and then give you a repair estimate.
What does a typical metal roof repair cost in Frankfort?
Most repairs start at $450, and leak repairs also start at $450. Screw replacement and re-fastening starts at $750. The final price depends on the size of the repair, the roof pitch, and whether we find hidden damage. We give you a free estimate before we start.
Do I need a permit for a metal roof in Frankfort?
Roofing permits are commonly required for a full replacement or re-roof, and the rules vary by jurisdiction. We check with the local building department before we start and handle the paperwork so you do not have to. Historic district and HOA review can also apply, and we factor that into the schedule.
My neighbor's tree drops limbs on my roof and my HOA has rules about metal roof color. Can you help?
Yes. We can trim back overhanging limbs as part of the prep, and we can provide color samples and documentation for HOA or historic review. If there is a property-line issue, we work with you to keep the installation within your boundary and avoid disputes.
Are you insured for roofing work in Frankfort?
Yes, we are fully insured with general liability and workers' compensation coverage. We can provide a certificate of insurance before we start, and we recommend asking for that from any contractor you hire.
What should I do to maintain my metal roof in Frankfort between seasons?
Check the gutters and downspouts in the fall after the leaves drop, and again in the spring. Look for loose fasteners, lifted panels, or debris at the eaves, especially on hillside homes where ice dams form. A yearly inspection can catch small issues before they become leaks. We offer free estimates for inspections.
Why choose us?

Trusted professionals in Lexington

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Lexington

All your work handled by qualified professionals in Lexington

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

241+ Verified Client Reviews in Lexington

⭐⭐⭐⭐⭐ 4.9/5 · 241 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Lexington · Response within 24h · No commitment · ☎ (859) 785-4928

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Lexington ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm