Serving the Lexington area  ·  (859) 785-4928  ·  Open Mon-Sun 7am-7pm
📞 (859) 785-4928 Free Quote

Metal Roofing in Nicholasville, KY (40356) · Local Professionals

Lexington Metal Roofing · Fast response in Nicholasville and the Lexington area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+241Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Nicholasville is where new subdivision roofs meet old bungalow roofs, and both take a beating from summer hail and straight-line wind. If you live off US-27 near the Kroger or over by Riney B Park, you know the drill: shingles lift, fasteners back out, and the next storm finds the weak spot.

We are Lexington Metal Roofing, based just up the road and serving Nicholasville (40356) and the surrounding Lexington area. Homeowners call us because we show up, we know the difference between a hail-bruised shingle roof in a newer subdivision and a tired tin roof on an older place, and we fix the problem without a sales pitch.

Metal Roofing in Nicholasville (40356)

Nicholasville sits on rolling karst limestone, and that matters for your roof. The ground moves with freeze-thaw cycles, and older homes near downtown often have shallow eaves and tight side yards where ladder access is a puzzle. Newer subdivisions off US-27 and Brannon Road have steeper composition roofs that shed water fast but show hail damage quickly, especially on south-facing slopes. We see a lot of metal shingle and standing seam work here because homeowners want one roof that handles hail, wind, and the summer sun without constant patching. We also work on the older bungalows and farm buildings out toward the county line, where retrofitting over existing shingles is often the smartest move if the deck is solid.

Our team has been working roofs in and around Fayette and Jessamine County for years. We know which Nicholasville streets have HOA design rules, which neighborhoods have tighter lots, and how to stage a job so your driveway stays usable. We are fully insured with general liability and workers' compensation, and we pull the permits the local building department requires.

Our services in Nicholasville

How a Job Works in Nicholasville

Step 1: You call (859) 785-4928 or request a free estimate online. We schedule an on-site assessment, walk the roof and the attic if needed, and give you a written scope with pricing. No pressure, no door-to-door tactics. If it is a storm damage call, we document what we find so you have photos and notes for your insurance company.

Step 2: Once you approve, we handle the permit through the local building department and coordinate with your HOA if your subdivision requires design review. On tight lots in older parts of Nicholasville, we stage materials in the driveway or on the street per city rules and keep walkways clear. For a retrofit over shingles, we confirm the existing layers meet code before we start. Most residential roofs take one to three days depending on size and weather.

Step 3: We clean up every day and do a final magnet sweep for nails. You get a walkthrough of the finished roof, the warranty paperwork, and our contact info for any follow-up. We leave your property clean and your roof watertight.

Pricing in Nicholasville depends on roof size, pitch, access, and condition. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and a retrofit over shingles around $7. Metal shingle and stone-coated steel both start around $9 per square foot. Repairs start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Gutters for metal roofs start at $9 per linear foot. Storm and wind damage inspections are free. The biggest cost factors are square footage, how many layers are coming off, roof height and access, and whether there is decking damage underneath. Call (859) 785-4928 for a free estimate and we will give you a real number, not a range that changes later.

My neighborhood off US-27 near Riney B Park got hit by hail last summer. How do I know if my metal roof needs repair or replacement?
Hail damage on metal roofs usually shows up as dents, bruised paint, or loosened fasteners, not always as a leak right away. We inspect the panels, seams, and fasteners and check the attic for water stains. If the damage is isolated to a few panels or fasteners, a repair is often enough. If the coating is compromised across a large area or seams are failing, replacement may be the better long-term call. We give you photos and a written recommendation either way.
A storm just peeled back part of my roof and it is raining. How fast can you get to Nicholasville?
We prioritize active leaks and storm damage in Nicholasville and the surrounding area. Call (859) 785-4928 and we will schedule the soonest available inspection, often same day or next day depending on call volume. In the meantime, we can talk you through temporary measures like tarping or moving valuables away from the leak. We document everything for your insurance claim.
What does a typical metal roof repair cost in Nicholasville?
Most repairs start at $450 for minor leak fixes and flashing work. Screw replacement and re-fastening starts at $750, and flashing, chimney, or skylight repair starts at $600. The final price depends on roof access, how many problem areas there are, and whether the decking needs work. We give you a firm quote after the on-site assessment, and storm inspections are free.
Do I need a permit to replace my roof in Nicholasville, and does the city inspect it?
In most cases, yes, a roofing permit is required for a full replacement or re-roof in Nicholasville. The local building department sets the thresholds, fees, and inspection schedule, and those rules can vary. We handle the permit application and coordinate the inspection as part of the job. If your home is in a historic district or your subdivision has HOA design review, we also help with that approval before we order materials.
My HOA requires a certain roof color and profile. Can you work with that, and what about the property line with my neighbor?
Yes. We regularly work with HOA design guidelines in Nicholasville subdivisions and can provide product samples and spec sheets for approval. On property lines, we keep materials and equipment on your side and follow city setback rules for staging. If a shared structure or fence line is involved, we document the existing condition before we start so there are no surprises.
Are you insured for work on my Nicholasville property?
Yes. We carry general liability insurance and workers' compensation coverage. We can provide a certificate of insurance before work begins, and we recommend asking any contractor for one. That coverage protects you if something goes wrong on the job.
What should I do to maintain my metal roof in Nicholasville between storms?
Keep gutters clear, especially in the fall when leaves drop, and check for loose fasteners after any big wind event. Look for lifted panels, dented areas, or rust spots at seams and flashing. A quick visual check from the ground after a storm can catch small issues before they become leaks. We offer free estimates for inspections if you want a professional set of eyes on it.
Why choose us?

Trusted professionals in Lexington

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Lexington

All your work handled by qualified professionals in Lexington

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

241+ Verified Client Reviews in Lexington

⭐⭐⭐⭐⭐ 4.9/5 · 241 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Lexington · Response within 24h · No commitment · ☎ (859) 785-4928

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Lexington ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm