Serving the Lexington area  ·  (859) 785-4928  ·  Open Mon-Sun 7am-7pm
📞 (859) 785-4928 Free Quote

Metal Roofing in Paris, KY (40361) · Local Professionals

Lexington Metal Roofing · Fast response in Paris and the Lexington area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+241Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Paris, Kentucky, is a town where historic brick homes on Main Street sit a few miles from sprawling Bourbon County horse farms, and the roofs overhead tell that story. From the slate-look roofs on older homes near the courthouse to the corrugated metal barns out on the farms, we know the housing stock here because we work on it every week. ZIP code 40361 covers a mix of 19th-century brick, mid-century ranches, and newer builds, and each one has its own roofing quirks.

Homeowners in Paris call Lexington Metal Roofing because we show up knowing the difference between a standing seam job on a downtown historic home and a ribbed panel retrofit on a farm out by Ruddles Mill Road. We are based in Lexington but Paris is a regular stop for our crew. If you are near the Bourbon County Courthouse or out toward Clintonville, we can be at your property for a free estimate.

Metal Roofing in Paris (40361)

Paris sits in the heart of the Bluegrass, and the land here is rolling karst limestone with fertile soil and the occasional sinkhole. That matters for roofing because drainage and grade around your foundation can affect how water sheds off the roof. On the historic brick homes near downtown, we often find original slate or standing seam tin that needs careful matching, especially if the house is in a historic district where the panel profile and color have to pass design review. Out on the farms, corrugated and ribbed panel roofing is the standard for barns and outbuildings, and we install and repair both. The weather here is humid in summer with severe thunderstorms, hail, and straight-line winds, plus ice storms and freeze-thaw cycles in winter. That combination means fasteners back out, seams separate, and flashing gaps open up. We see a lot of wind-lifted panels after spring storms and ice damming at the eaves on older homes with steep roofs.

Our team has worked on everything from stone-coated steel roofs that mimic the slate look on historic homes to screw replacement and re-fastening on farm buildings. We know that a metal roof in Paris needs to handle hail, wind, and the freeze-thaw cycle, and we install with that in mind.

Our services in Paris

How a Job Works in Paris

Step 1: You call us at (859) 785-4928 or request a free estimate online. We schedule an on-site assessment at your Paris property, whether you are in a historic home near the courthouse or on a farm outside town. We inspect the roof, check the flashing, fasteners, and seams, and talk with you about what we find. You get a written estimate with options, no pressure.

Step 2: Once you approve, we handle the work. In Paris, that might mean coordinating with the local building department for a permit on a full replacement, or working with a historic district review if your home is in a designated area. On tight lots near downtown, we plan material delivery and staging carefully. On farm properties, we work around your schedule and any livestock or equipment. We keep you informed on timing and any surprises we find under the old roof.

Step 3: When the job is done, we clean up thoroughly. We magnet-sweep for nails, haul away old materials, and do a final walkthrough with you to make sure you are satisfied. We do not leave until you have had a chance to look at the finished roof and ask questions.

Pricing for metal roofing in Paris depends on the size of your roof, the material, access, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot. Repairs start at $450, and screw replacement or re-fastening starts at $750. Stone-coated steel and metal shingle roofing both start at $9 per square foot, which is a good option for historic homes that want a slate look. Corrugated and ribbed panel roofing starts at $5.50 per square foot, popular for barns and outbuildings. We also offer free estimates for storm damage and inspections. Call (859) 785-4928 to get a precise quote for your Paris property.

My historic home near the Bourbon County Courthouse has an old slate roof. Can you match the look with metal?
Yes. We install stone-coated steel roofing that mimics the look of slate, and it is a good fit for historic homes in Paris. If your home is in a historic district, we can help you understand the design review requirements before we order materials. We will bring samples so you can see the profile and color options.
A storm just blew through Paris and lifted some panels on my barn roof. How fast can you get out?
We prioritize storm damage calls in Paris and the surrounding area. Call us at (859) 785-4928 and we will schedule an inspection as soon as possible, often within a day or two depending on the volume of calls. We can tarp or secure the roof temporarily if needed and give you a repair estimate.
What does a metal roof cost for a typical ranch home in Paris?
For a ranch home in Paris, a basic corrugated or ribbed panel roof might start around $5.50 per square foot, while standing seam runs closer to $10 per square foot. A 1,500 square foot roof could range from roughly $8,000 to $15,000 depending on material and complexity. We give free estimates so you get an exact number for your home.
Do I need a permit to replace my roof in Paris?
In most cases, yes. A full roof replacement or re-roof typically requires a permit from the local building department. Requirements vary, so we always check with the city or county before starting work. We can handle the permit application for you and make sure the job meets local code.
My neighbor's tree limbs hang over my roof. What are my options if I want a metal roof?
Overhanging limbs can drop debris and cause damage, so we recommend trimming them back before installation. If a limb from a neighbor's tree falls and damages your roof, that is typically a matter for your insurance and possibly your neighbor. We can inspect and document any damage for your claim. We do not get involved in property line disputes, but we can suggest ways to protect your roof from future limb damage.
Are you insured for roofing work at my Paris property?
Yes, we are fully insured with general liability and workers' compensation coverage. This protects you and your property in case of an accident.
What maintenance does a metal roof need in Paris to handle the humid summers and ice storms?
We recommend an annual inspection, especially after storm season. Check fasteners for tightness, look for loose or missing screws, and make sure flashing around chimneys and skylights is sealed. In Paris, ice damming can be an issue on older homes, so we may suggest snow guards or ice protection. Keeping gutters clear and trimming tree limbs also helps. We offer free inspections to catch small issues before they become leaks.
Why choose us?

Trusted professionals in Lexington

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Lexington

All your work handled by qualified professionals in Lexington

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

241+ Verified Client Reviews in Lexington

⭐⭐⭐⭐⭐ 4.9/5 · 241 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Lexington · Response within 24h · No commitment · ☎ (859) 785-4928

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Lexington ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm