Serving the Lexington area  ·  (859) 785-4928  ·  Open Mon-Sun 7am-7pm
📞 (859) 785-4928 Free Quote

Metal Roofing in Versailles, KY (40383) · Local Professionals

Lexington Metal Roofing · Fast response in Versailles and the Lexington area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+241Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Versailles still has the feel of a small Bluegrass town, but the roofs here tell a bigger story. Around the courthouse square and the older blocks off Main Street, you'll find 19th-century brick homes with slate and standing seam tin, while the horse farms just outside town hold long tobacco barns and run-in sheds under corrugated metal. Down the side streets and out toward Woodford County High School, the mix runs from mid-century ranches to newer brick homes with steep shingle roofs.

Homeowners in 40383 call Lexington Metal Roofing because we know how this town is put together. We've worked on historic downtown properties, farm buildings off Pisgah Pike, and suburban homes near the Versailles Park. Whether it's a standing seam roof on a Victorian or a metal retrofit on a barn, we bring the same crew and the same straight answers.

Metal Roofing in Versailles (40383)

Versailles sits on rolling karst limestone, and that ground moves. Older homes near the courthouse square often have shallow lots with mature trees, tight side yards, and original roof pitches that were never designed for modern panel lengths. On the horse farms, barns and outbuildings sit on grade with wide access, but the roofs take a beating from wind and hail. We see a lot of failed fasteners, separated seams, and flashing gaps on older metal roofs, especially where gutters have pulled away or where tree limbs have dropped. Ice damming shows up on steeper roofs at the eaves during freeze-thaw cycles, and summer storms with straight-line wind can peel back panels that weren't fastened correctly the first time.

Our team has worked across Versailles and the surrounding Lexington area for years. We know which streets have alley access, which historic blocks need a lighter touch, and which farm lanes can handle a full crew and a delivery truck. We also know the local building department and what they look for on a re-roof, so we plan for inspections from the start.

Our services in Versailles

How a Job Works in Versailles

Step 1: You call (859) 785-4928 or request a free estimate online. We schedule a time to walk the roof with you, check the attic and flashing details, and talk through what you're seeing. For storm damage, we document everything with photos and measurements so you have what you need for an insurance claim. We never promise coverage, but we do make the paperwork easier.

Step 2: Once you approve the scope and price, we pull the permit if one is required and order materials. In Versailles, that often means coordinating with historic district review downtown or an HOA in the newer subdivisions. On tight lots near the square, we plan for staging and delivery so we don't block your neighbors. On farm properties, we work around your schedule and the weather. Most metal roof installations take a few days to a week depending on size and complexity.

Step 3: Cleanup is part of the job. We magnet-sweep the yard and driveway for nails, haul away old materials, and walk the finished roof with you. We don't leave until you've seen the work and we've answered every question.

Pricing in Versailles depends on the roof, the access, and the condition of what's underneath. For a typical asphalt shingle roof, metal roof installation starts around $8 per square foot, standing seam runs from $10 per square foot, and a metal roof over existing shingles starts around $7 per square foot. Repairs like a leak or flashing fix start around $450, while screw replacement and re-fastening starts at $750. Stone-coated steel and metal shingle roofs start around $9 per square foot, and copper or specialty metal starts at $20 per square foot. Farm and commercial buildings are quoted per project. The biggest cost factors are roof size, pitch, number of penetrations, and how much prep work is needed. We give free estimates at (859) 785-4928, and we'll tell you what we see without pressure.

My 1920s house near the courthouse square has an original standing seam tin roof. Can you repair it or should it be replaced?
We see a lot of those original tin roofs in downtown Versailles. Often they can be repaired if the panels are sound and the leaks are at fasteners or seams. We'll inspect the metal, check for rust-through, and give you an honest recommendation. Sometimes a coating and re-fastening buys years, other times replacement makes more sense.
A storm just took off some panels on my barn off Pisgah Pike. How fast can you get out there?
Call (859) 785-4928 and we'll schedule a free inspection as soon as possible. For active leaks or exposed decking, we can often tarp or make temporary repairs the same day or next. We document the damage for your insurance claim and give you a written repair estimate.
What does a metal roof cost for a typical ranch house in Versailles?
For a ranch around 1,500 to 2,000 square feet, a basic corrugated or ribbed panel roof often runs $5.50 to $8 per square foot installed, while standing seam is closer to $10 to $14 per square foot. The exact price depends on pitch, tear-off, and trim details. We give free written estimates.
Do I need a permit to replace my roof in Versailles?
Most full replacements and re-roofs in Versailles require a permit through the local building department. Rules vary by jurisdiction and by scope, so we confirm with the city before we start. If your home is in a historic district, there may be additional design review. We handle the paperwork and inspections as part of the job.
My neighbor and I share a property line, and my new metal roof will overhang slightly. Do I need their permission?
Kentucky property line rules generally allow a roof to overhang your own property, but if the overhang crosses the line or drains onto a neighbor's lot, it's best to talk with them first. If you're in an HOA, check the covenants for roof color and profile restrictions. We can help you review the plans before we order materials.
Are you fully insured for work at my Versailles property?
Yes. We carry general liability insurance and workers' compensation coverage.
What should I do to maintain my metal roof in Versailles between seasons?
Keep gutters clear, especially under the big oaks and walnuts that drop limbs and leaves. Check fasteners after severe storms, and look for lifted panels or loose flashing. Ice damming can be an issue on steeper roofs, so snow guards and proper attic insulation help. We offer free inspections if you want a professional eye.
Why choose us?

Trusted professionals in Lexington

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Lexington

All your work handled by qualified professionals in Lexington

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

241+ Verified Client Reviews in Lexington

⭐⭐⭐⭐⭐ 4.9/5 · 241 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Lexington · Response within 24h · No commitment · ☎ (859) 785-4928

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Lexington ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm