Serving the Lexington area  ·  (859) 785-4928  ·  Open Mon-Sun 7am-7pm
📞 (859) 785-4928 Free Quote

Metal Roofing in Mount Sterling, KY (40353) · Local Professionals

Lexington Metal Roofing · Fast response in Mount Sterling and the Lexington area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+241Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Mount Sterling's courthouse square and the older blocks around it are full of homes that have been under the same shingle roof for 20 or 30 years, and out on the farm lots along US-60 and KY-11, the barns and ranch houses are showing their age too. If you live in 40353, you already know the drill: hail in April, straight-line wind in June, ice in January, and a roof that quietly gives out somewhere in between.

We're Lexington Metal Roofing, and Mount Sterling is one of our regular stops. From the historic homes near the Montgomery County Courthouse to the newer subdivisions off Indian Mound Drive, we've replaced shingles with standing seam, retrofitted metal over existing shingles, and chased down leaks that three other outfits couldn't find.

Metal Roofing in Mount Sterling (40353)

Mount Sterling sits in the rolling bluegrass and karst limestone country east of Lexington, and that geology matters. Sinkholes and shallow soil mean water moves fast and unpredictably, so we pay close attention to grade, downspout discharge, and where runoff actually goes. On the older in-town lots near the courthouse, houses sit close together with mature trees, tight side yards, and original brick that doesn't take kindly to ladder scars. Out on the farm properties, you've got long runs, steep pitches on old barns, and metal roofs that have been patched with whatever was on the truck. We work with all of it: standing seam, corrugated and ribbed panels, metal shingles, stone-coated steel, and copper for the historic homes that need it.

Our team has been serving Mount Sterling and the surrounding Lexington area long enough to know which suppliers can get panels here fast, which inspectors want to see what, and how to stage a job so your driveway stays usable. We're fully insured with general liability and workers' compensation, and we pull permits when they're required.

Our services in Mount Sterling

How a Job Works in Mount Sterling

Step 1: You call (859) 785-4928 or send us a message, and we set up a free on-site assessment. We walk the roof, check the decking, flashing, and fasteners, and talk through what you're seeing (stains on the ceiling, granules in the gutters, a panel that lifted in the last storm). You get a written estimate with real numbers, not a range that doubles by the time we start.

Step 2: Once you approve, we schedule the work and handle the permit if Mount Sterling or Montgomery County requires one. On tight in-town lots, we stage materials in the driveway or on the street according to local rules, and we protect landscaping and brick. If you're in an HOA or a historic overlay, we coordinate the design review before we order panels so there are no surprises on color or profile. For a metal roof over shingles, we confirm the existing layers meet code before we touch anything.

Step 3: Cleanup is part of the job. We magnet-sweep for nails, haul off old material, and do a final walkthrough with you so you can see the flashing, seams, and fasteners up close. We don't leave until you're satisfied and the property is clean.

Pricing in Mount Sterling depends on the size and pitch of your roof, how many layers are already on it, access, and condition of the decking. As a ballpark: corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) around $7, metal roof installation around $8, metal roof replacement around $9, and standing seam around $10. Metal shingle and stone-coated steel also start around $9. Repairs start at $450, screw replacement and re-fastening at $750, flashing and chimney repair at $600, and gutters for metal roofs at $9 per linear foot. Storm and wind damage inspections are free. Call (859) 785-4928 for a free estimate specific to your property.

My house near the Montgomery County Courthouse has an original slate roof that's failing. Can you match the look with metal?
Yes. On older homes around the courthouse square and the historic blocks, we often recommend standing seam or metal shingles in a color and profile that reads close to slate without the weight or maintenance. We'll walk the roof, check the decking and flashing, and show you samples so you can see how it looks against the brick.
A storm just peeled back panels on my barn off US-60. How fast can you get out there?
Call (859) 785-4928 and we'll schedule a free storm and wind damage inspection as soon as we can, usually within a day or two depending on how many calls are coming in. We'll tarp or secure anything that's exposed if needed, document the damage for your insurance, and give you a written repair estimate.
What does a typical metal roof replacement cost for a ranch house in Mount Sterling?
For a typical single-story ranch in 40353, metal roof replacement usually starts around $9 per square foot, so a 1,500 square foot roof might land in the $13,000 to $16,000 range before extras. Factors that move the number: pitch, number of existing layers, decking condition, chimneys or skylights, and whether you choose standing seam or a panel profile. We give you a firm written estimate after the free inspection.
Do I need a permit to replace my roof in Mount Sterling?
Often yes for a full replacement or re-roof, and the rules vary by jurisdiction. We always check with the City of Mount Sterling or Montgomery County before we start, and we handle the permit paperwork as part of the job. If your home is in a historic district or an HOA, there may also be design review, and we'll coordinate that before ordering materials.
My neighbor's tree limbs hang over my roof line. What are my options before I replace the roof?
Kentucky property law generally allows you to trim limbs that cross your property line, but it's smart to talk with your neighbor first and keep it polite. If the limbs are causing damage or making access difficult, we can note it during the inspection and suggest trimming before we install so the new roof isn't compromised. For HOA properties, check the covenants on tree maintenance and roof color before you commit.
Are you insured for roof work on my Mount Sterling property?
Yes, we're fully insured with general liability and workers' compensation.
What's the best time of year to schedule metal roof work in Mount Sterling, and what maintenance should I do between jobs?
Spring and early summer fill up fast after hail and wind season, and fall is popular before winter ice. Late fall and winter are often easier to schedule. Between jobs, keep gutters clear, check fasteners and sealant around flashing once a year, and look for lifted panels or granules in the gutters after storms. Ice damming at the eaves is common on older homes with steep roofs, so make sure attic ventilation and insulation are doing their job.
Why choose us?

Trusted professionals in Lexington

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Lexington

All your work handled by qualified professionals in Lexington

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

241+ Verified Client Reviews in Lexington

⭐⭐⭐⭐⭐ 4.9/5 · 241 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Lexington · Response within 24h · No commitment · ☎ (859) 785-4928

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Lexington ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm