Serving the Lexington area  ·  (859) 785-4928  ·  Open Mon-Sun 7am-7pm
📞 (859) 785-4928 Free Quote

Metal Roofing in Winchester, KY (40391) · Local Professionals

Lexington Metal Roofing · Fast response in Winchester and the Lexington area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+241Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Winchester's brick homes and farm-edge lots are showing their age, and that aging shingle roof is often the first thing to go. From the historic blocks near the Clark County Courthouse to the newer subdivisions off Bypass Road, homeowners in 40391 are dealing with the same problems: worn shingles, leaky flashings, and storm damage that never quite gets fixed right.

We're Lexington Metal Roofing, and we've been helping Winchester property owners make the switch to metal or get their existing metal roof back in shape. Whether you're near the Leeds Center for the Arts or out on a farm off Van Meter Road, we know the local housing stock and the weather that beats up your roof.

Metal Roofing in Winchester (40391)

Winchester sits in the rolling Bluegrass just east of Lexington, and the housing stock reflects that mix of old and new. In the older neighborhoods near downtown, you'll find early 1900s brick homes with steep roofs and original detailing, many still under shingle or slate. Out toward the edges, farmhouses and tobacco barns sit on larger lots with metal roofs that have seen decades of weather. The ground here is karst limestone with sinkholes, so drainage and proper flashing matter more than most homeowners realize. We pay attention to how water moves off your roof and away from your foundation, especially on properties with grade changes or tight side yards.

Our team has worked on everything from historic homes near the courthouse to modern ranches in the Belmont area. We know how to match panel profiles and colors to the character of older brick homes, and we understand the permitting quirks that come with older neighborhoods. When you call us, you're getting a crew that knows Winchester, not a franchise passing through town.

Our services in Winchester

How a Job Works in Winchester

Step 1: You call us at (859) 785-4928 or request a free estimate online. We'll set up a time to come out and inspect your roof, whether it's a small repair or a full replacement. We'll look at the current condition, check for leaks or storm damage, and talk through your options, including metal roof over shingles if your existing roof can handle it. You'll get a clear written estimate with no surprises.

Step 2: Once you approve, we schedule the work. For Winchester properties, we handle the permit process with the local building department and coordinate any HOA or historic district requirements if needed. On tight lots or older neighborhoods, we plan deliveries and staging to keep disruption low. Our crew is fully insured, and we protect your landscaping and siding during installation.

Step 3: After the job is done, we do a thorough cleanup, including magnet sweeps for nails and debris. We walk the property with you to make sure you're satisfied, and we don't leave until everything meets our standards. We also provide documentation for any insurance claims if storm damage was involved.

Pricing for metal roofing in Winchester depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts around $8 per square foot, standing seam runs about $10 per square foot, and metal roof over shingles can start at $7 per square foot. Smaller repairs like fixing a leak or replacing flashing typically start around $450, while a full roof replacement averages $9 per square foot. We always provide a free estimate so you know exactly what you're paying before we start. Call us at (859) 785-4928 to schedule yours.

My house is in the older part of Winchester near the courthouse, and it has a steep roof with original details. Can you match a metal roof to that style?
Yes, we work with historic homes regularly. We can recommend standing seam or metal shingle profiles that complement the architecture, and we'll help you choose a color that fits the neighborhood. We also handle any historic district review if your property falls within one.
A storm just blew through Winchester and lifted some panels on my barn roof. How fast can you get out to make repairs?
We prioritize storm damage calls. Call us at (859) 785-4928, and we'll schedule an inspection as soon as possible, often within a day or two depending on demand. We can tarp or secure the area to prevent further damage and provide a written estimate for permanent repairs.
What does a typical metal roof repair cost in Winchester?
Most repairs start around $450, but the final cost depends on the extent of damage, accessibility, and materials needed. We give you a firm quote after inspecting the roof, so you know the price before we begin.
Do I need a permit to replace my roof in Winchester?
Yes, roofing permits are generally required for replacements and some repairs. The rules vary by jurisdiction, so we always check with the local building department to ensure compliance. We handle the permit application for you as part of our service.
My neighborhood has an HOA, and they have rules about roof colors. Can you help with approval?
We can provide material samples and documentation to submit to your HOA for approval. We're familiar with common HOA requirements in the area and can guide you through the process to avoid delays.
Are you fully insured for work at my Winchester property?
Yes, we carry general liability insurance and workers' compensation coverage. We're happy to provide certificates of insurance upon request so you can verify our coverage before work begins.
What maintenance should I do on my metal roof in Winchester to prevent problems?
Check for loose fasteners and debris buildup, especially after storms. Keep gutters clear and trim overhanging branches. We recommend a professional inspection every few years to catch small issues before they become leaks. Our team can perform inspections and minor maintenance to keep your roof in good shape.
Why choose us?

Trusted professionals in Lexington

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Lexington

All your work handled by qualified professionals in Lexington

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

241+ Verified Client Reviews in Lexington

⭐⭐⭐⭐⭐ 4.9/5 · 241 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Lexington · Response within 24h · No commitment · ☎ (859) 785-4928

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Lexington ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm